Filter Sort
close
Categories
Filter By
Brand
Color
Compliance
Country of Origin
Division
Gross Weight (lbs.)
Height (in.)
Length (in.)
Prop 65 Chemical
Prop 65 Warning Copy
Warranty
Weight (lbs.)
Width (in.)

Danforth, Tie Down, 20.50 - 2.50

34 items
1 - 34 of 34
Boe Guide Assembly

Boe Guide Assembly

48103A

View Details
10 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk

10 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk

86131

Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
View Details
2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft

2.5 in. x 1.5 in. Rubber End Cap, 5/8 in. Shaft

86478

Adding an extra layer of protection and ease to your boating experience, Tie Down’s End Cap is the perfect accessory to guide and keep your boat straight during loading and unloading. Designed to prevent the boat from slipping off the side, the end cap provides an additional width that ensures a secure fit. This essential component works in conjunction with the bow roller, offering enhanced boat alignment and stability.
View Details
3/16 in. x 100 ft. Galvanized Cable w/ Swagged Loop and Thimble

3/16 in. x 100 ft. Galvanized Cable w/ Swagged Loop and Thimble

50075

View Details
1/4 in. x 50 ft. Galvanized Cable w/ Swagged Loop and Thimble

1/4 in. x 50 ft. Galvanized Cable w/ Swagged Loop and Thimble

50090

View Details
1/8 in. ID x 1/4 in. OD x 50 ft. Galvanized Cable

1/8 in. ID x 1/4 in. OD x 50 ft. Galvanized Cable

50200

View Details
1/8 in. ID x 3/16 in. OD x 100 ft. Galvanized Cable

1/8 in. ID x 3/16 in. OD x 100 ft. Galvanized Cable

50215

View Details
3/16 in. ID x 1/4 in. OD x 30 ft. Galvanized Cable

3/16 in. ID x 1/4 in. OD x 30 ft. Galvanized Cable

50225

View Details
1/4 in. ID x 5/16 in. OD x 30 ft. Galvanized Cable

1/4 in. ID x 5/16 in. OD x 30 ft. Galvanized Cable

50245

View Details
1/4 in. ID x 3/8 in. OD x 6 ft. Vinyl Coated Galvanized Cable

1/4 in. ID x 3/8 in. OD x 6 ft. Vinyl Coated Galvanized Cable

50570

View Details
6 in. Black Roller Piling Hoop

6 in. Black Roller Piling Hoop

48939

View Details
Hot Dip Galvanized Split Panel Bracket, Pair

Hot Dip Galvanized Split Panel Bracket, Pair

81235

Introducing Tie Down's Split Panel Bracket, the perfect solution for accommodating any size keel roller and ensuring the stability of your boat on a trailer. These brackets feature slots that allow for easy vertical adjustment, providing a secure fit and added support. Crafted from hot dip galvanized steel, these brackets are built to withstand the elements and offer long-lasting protection. The slots in the brackets are designed to accept 7/16 in. or 1/2 in. bolts, offering versatility and compatibility with different hardware. Choose between roller shaft diameters of 1/2 in. or 5/8 in. for a customized setup. Each package includes a pair of brackets, one for the left side and one for the right side, providing a complete solution for your boat trailer needs.
View Details
3/16 in. ID x 1/4 in. OD x 50 ft. Galvanized Cable

3/16 in. ID x 1/4 in. OD x 50 ft. Galvanized Cable

50230

View Details
16 in. Bolster Bracket

16 in. Bolster Bracket

44045

Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion.
View Details
1.44 in. x 1.75 in. Spring Hanger

1.44 in. x 1.75 in. Spring Hanger

17013

This 1.5 in. x 1.75 in. spring hanger is a metal bracket that attaches to the trailer frame. It is designed to hold one end of a leaf spring and allow it to pivot or move as needed when the trailer encounters bumps or uneven road surfaces. This pivotal movement helps absorb shocks and vibrations, ensuring a more comfortable and safer towing experience for both the trailer and the boat. Properly installed and maintained spring hangers are essential for the overall performance and safety of a boat trailer as they contribute to the trailer's stability, weight distribution, and the reduction of road-induced stress on the boat and its hull.
View Details
Winch Bow Roller Mount

Winch Bow Roller Mount

43661

View Details
2-1/2 in. x 2 in. Smooth Amber Roller

2-1/2 in. x 2 in. Smooth Amber Roller

48665

View Details
Cast Iron And Aluminum Options Zip Rail Pipe Fittings 6 Ft. Pipe Yellow Part Id: 70836-72y

Cast Iron And Aluminum Options Zip Rail Pipe Fittings 6 Ft. Pipe Yellow Part Id: 70836-72y

70836-72Y

Tie Down's Zip Rail Pipe Fittings are the epitome of strength and durability, available in your choice of either aluminum or steel cast materials. When paired with our galvanized rail sections, they create an exceptionally robust and enduring safety solution. Our Zip Rail Pipe Fittings can be used with safety yellow, galvanized, or even custom-colored safety rails, allowing you to tailor your guardrail system. To simplify the procurement process, Tie Down offers convenient kit options for the Zip Rail Fittings. These kits encompass all the essential components required for a comprehensive guardrail system, making it easy for users to acquire everything they need in a single package. Whether you opt for a DIY installation or enlist a contractor, you'll appreciate the straightforward setup process as no special tools are necessary, and the sections install rapidly. From industrial facilities and commercial buildings to construction sites and public spaces, these fittings empower you to create effective safety railings wherever they are needed.
View Details
2-3/4 in. x 2-1/2 in. Commercial Grade Heavy Duty ANGLE BRACKETS

2-3/4 in. x 2-1/2 in. Commercial Grade Heavy Duty ANGLE BRACKETS

26392

Tie Down's Commercial Grade Heavy-Duty Angle Brackets are the ultimate solution for robust and dependable cross supports in your projects. Engineered with durability as the top priority, these angle brackets and clips are specifically designed to deliver outstanding strength and stability. Constructed from high-quality materials, they are built to withstand heavy loads and challenging environments, ensuring long-lasting performance. Whether you need to reinforce shelves, construct frames, or create secure connections, these commercial-grade brackets and clips are the reliable choice for your heavy-duty applications.
View Details
8 in. 2-3/4 in. BUNK BOARDS BOLSTER SWIVEL BRACKETS

8 in. 2-3/4 in. BUNK BOARDS BOLSTER SWIVEL BRACKETS

81211

Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
View Details
10 in. 2-3/4 in. BUNK BOARDS BOLSTER SWIVEL BRACKETS 10 in.

10 in. 2-3/4 in. BUNK BOARDS BOLSTER SWIVEL BRACKETS 10 in.

81216

Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
View Details
12 in. 2-3/4 in. BUNK BOARDS BOLSTER Swivel BRACKETS

12 in. 2-3/4 in. BUNK BOARDS BOLSTER Swivel BRACKETS

81221

Tie Down's Bolster Swivel Brackets are the perfect solution for supporting bunk boards on your boat trailer. These brackets are thoughtfully designed with slotted holes for easy vertical adjustment, allowing you to customize the bunk board position to fit your specific boat's requirements. The added non-slip dimples provide excellent stability, preventing unwanted movement and enhancing the load capacity. Crafted with high-quality materials, our Bolster Swivel Brackets are hot dip galvanized, ensuring long-lasting protection against the elements and harsh marine environments. You can trust these brackets to withstand the test of time and provide reliable support for your boat. Each package includes a pair of swivel brackets, along with bolts and nyloc nuts for easy and comprehensive installation. For added convenience, we also offer bulk options, providing you with the flexibility to purchase a single bracket if needed. Available in three sizes, 8 inches, 10 inches, and 12 inches, our Bolster Swivel Brackets cater to a range of boat sizes, ensuring a perfect fit for various trailers and boats. The 2-¾ inch slot length allows for precise adjustments, ensuring your boat rests securely on the bunk boards.
View Details
8 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk

8 in. 2-3/4 in. Galvanized BOLSTER BRACKETS, Bulk

86130

Tie Down's Bolster Brackets are specifically designed to offer sturdy support, ensuring your boat's bunks are well-maintained during transport and storage. Featuring vertical adjustment slots with a 2-¾ inch slot length, our Bolster Brackets allow for precise customization to match your boat's specific requirements. Non-slip dimples are strategically incorporated to prevent movement and increase load capacity, providing extra stability and peace of mind during boat loading and unloading. Crafted with hot dip galvanized steel, our Bolster Brackets are built to withstand the elements, offering long-lasting protection against corrosion. Choose from a variety of sizes, including 8 inches, 10 inches, and 12 inches, catering to different trailer configurations and boat weights. Available in 2-packs or bulk quantities, Tie Down provides flexible options to accommodate your needs.
View Details
Galvanized I-BEAM MOUNTING KIT - GUIDE POSTS

Galvanized I-BEAM MOUNTING KIT - GUIDE POSTS

86569

Tie Down's I-Beam Mounting Kit, the perfect solution to securely mount a 1-1/2 inch square guide tube onto any steel or aluminum I-beam trailer frame, includes all the essential components you need for a reliable and durable installation. The I-Beam Mounting Kit features four galvanized brackets, ensuring exceptional corrosion resistance and long-lasting protection against the elements. With this sturdy and robust construction, you can trust in the durability and reliability of your guide tube installation, even in challenging conditions. Included in the kit are two sets of bolts - two smaller ? inch bolts and two 3/8 inch bolts, giving you the flexibility to choose the appropriate size depending on your frame rail width. The hardware is zinc-plated, offering added protection and ensuring the bolts stay in excellent condition over time. With the I-Beam Mounting Kit, you can enjoy a hassle-free and straightforward installation process, allowing you to get your guide tube securely mounted to your I-beam trailer frame quickly and easily. This convenience saves you time and effort during the setup process, so you can focus on other aspects of your trailer's maintenance and preparation. Whether you have a steel or aluminum I-beam trailer frame, Tie Down's I-Beam Mounting Kit is designed to provide a secure and dependable solution for your guide tube installation needs.
View Details
Strap Protectors, 100-pack

Strap Protectors, 100-pack

59232P

Tie Down's Strap Protectors are the ultimate solution for ensuring the durability and longevity of your valuable straps. Designed to provide essential protection, these sturdy protectors attach securely between the strap and I-beam, guarding against cutting or breaking on sharp edges. With easy installation and a reliable fit, our Strap Protectors seamlessly integrate with your existing strapping system, providing an extra layer of defense against wear and tear. Whether you're securing cargo, equipment, or heavy loads, these Strap Protectors act as a reliable barrier, safeguarding your straps from rough or jagged surfaces. Their robust construction absorbs friction and impact, reducing the risk of damage and preserving the strength of your straps. These Strap Protectors come in either 100 or 500 per box.
View Details
Danforth S600 Anchor Kit

Danforth S600 Anchor Kit

95096

Tie Down's Danforth Standard Anchor Kit featuring the S600 model is the ultimate solution for secure anchoring on your boat. Crafted with high-strength steel and hot-dip galvanized for exceptional durability, this kit ensures long-lasting protection against the harsh marine environment. The kit includes everything you need for reliable anchoring: one S600 Danforth® Anchor, a coil of 3/8 in. x 150 ft. nylon anchor line with a thimble, a 1/4 in. x 4 ft. stainless steel chain, and two shackles. With this comprehensive package, you can confidently set up a robust anchoring system for your boat. The S600 Danforth Anchor boasts a holding power of 600 lbs. This anchor is designed to fit boats with a length between 17-27 ft., making it suitable for a wide range of vessels. Despite its impressive capabilities, the anchor remains lightweight, weighing in at just 9 lbs., ensuring ease of handling and storage.
View Details
Class 4, 5/16 in., OAL 40-3/4 in. Zinc Plated SAFETY CHAINS

Class 4, 5/16 in., OAL 40-3/4 in. Zinc Plated SAFETY CHAINS

81204

Tie Down's Zinc Plated Safety Chains offer dependable security and peace of mind during towing operations. Sold in pairs and designed as replacement parts, these safety chains are engineered for horizontal pulling applications. The chains come with durable s-hooks for easy attachment to your trailer and towing vehicle. As a vital safety precaution, these chains are only as strong as their weakest link, reinforcing the importance of using high-quality and reliable components. With a Class four rating and a carrying capacity of 7,000 lbs., they provide robust support for various towing needs. Crafted from sturdy 5/16-inch steel and zinc plated for corrosion resistance, these safety chains ensure long-lasting durability and performance.
View Details
3 in. x 16 in. Black Bunk Slicks, 10-pack

3 in. x 16 in. Black Bunk Slicks, 10-pack

86164

Tie Down's PVC molded Bunk Slicks are designed to bolt directly onto your carpeted bunk boards, offering a smooth surface that allows your boat to slide on and off the trailer with ease. Compatible with any standard bunk board, our Bunk Slicks provide a versatile and convenient solution for enhancing your boat trailer's bunk support. Available in two sizes, each pack contains 10 Bunk Slicks, ensuring ample coverage and support for your valuable watercraft. Measuring 3 inches wide by 16 inches in length, our Bunk Slicks offer optimal boat support while maintaining a compact and streamlined design.
View Details
1-3/4 in. x 17 in. Bunk Slick, 8-Pack

1-3/4 in. x 17 in. Bunk Slick, 8-Pack

86170

Tie Down's PVC molded Bunk Slicks are designed to bolt directly onto your carpeted bunk boards, offering a smooth surface that allows your boat to slide on and off the trailer with ease. Compatible with any standard bunk board, our Bunk Slicks provide a versatile and convenient solution for enhancing your boat trailer's bunk support. Available in two sizes, each pack contains 8 Bunk Slicks, ensuring ample coverage and support for your valuable watercraft. Measuring 1-¾ inches wide by 17 inches in length, our Bunk Slicks offer optimal boat support while maintaining a compact and streamlined design.
View Details
18 in. standoff Adjustable Safety Corner Ladder Stabilizer

18 in. standoff Adjustable Safety Corner Ladder Stabilizer

48586

Roof Zone's Corner Ladder Stabilizer is a great tool for working on corners and flat surfaces. This product offers stability in those harder to work in areas and works with any aluminum ladder of all ratings. With the addition of this product, feel more comfortable on a ladder when working in cornered and flat surfaces. Tie Down Safety maintains high standards and quality control through quality raw materials and components in the USA.
View Details
1000 lbs. - 3500 lbs. Capacity Front Spring Hanger, 1 per pack

1000 lbs. - 3500 lbs. Capacity Front Spring Hanger, 1 per pack

86274

Tie Down's Spring Hangers offer the strength and durability required to withstand the demands of towing. Our rear hangers are designed for use on slipper springs measuring 1-3/4 inches to 2 inches wide, with a capacity of 5,200 lbs. to 8,000 lbs., making them suitable for medium-duty axles. These hangers are constructed from 1/4-inch stock steel, ensuring robust performance and reliability. Ideal for slipper and double-eye springs mounted on medium-duty axles with a capacity of 1,000 lbs. to 3,500 lbs., our front spring hangers offer dependable support for your trailer's suspension system. Pre-drilled for 9/16-inch bolts, these hangers ensure easy installation and a secure fit. Our spring hangers come in raw unfinished steel, providing a versatile option for customization or finishing to match your trailer's aesthetics. Each pack contains one spring hanger, providing a convenient and cost-effective solution for your trailer's suspension needs.
View Details
SUPER HOOKER KITS #8 Anchor Kit

SUPER HOOKER KITS #8 Anchor Kit

95095

Tie Down's comprehensive kit includes everything you need for a reliable anchoring system: the #8 Super Hooker Anchor, a 100 ft. nylon anchor line with a thimble, a 6 ft. galvanized chain, and two 5/16 in. shackles. The #8 Super Hooker Anchor boasts an impressive holding power of 480 lbs., making it an ideal choice for boats with a length between 16-24 ft. Weighing only 9 lbs., this anchor is both lightweight and powerful, ensuring your boat stays safely in place. Featuring a traditional fluke-style design, Super Hooker Anchors are crafted with durable materials that undergo a hot-dip galvanization process for long-lasting protection against corrosion and harsh marine conditions. With the Super Hooker Kit, you can set sail with confidence, knowing you have a reliable anchoring solution by your side.
View Details
5x 3x 5-3/8 in. 11 Gauge Steel PANEL BRACKETS

5x 3x 5-3/8 in. 11 Gauge Steel PANEL BRACKETS

86151

Tie Down's Panel Brackets are specifically designed for use with keel rollers, ensuring reliable support and protection for your boat during loading and unloading. Featuring slots that accept 7/16 in. or 1/2 in. diameter bolts, our Panel Brackets provide vertical roller adjustment, allowing you to customize the setup to match your boat's specific requirements. Accommodating both 1/2 in. and 5/8 in. sizes and hot dip galvanized for lasting protection, our Panel Brackets are built to withstand the elements and maintain their performance over time, even in harsh marine environments. With a roller size of 5 inches, the width between slots is 3 inches, and the bracket width is 5-? inches, providing a secure and snug fit for your keel rollers.
View Details
3/8 in. x 6 ft. Galvanized Chain and Shackles with 2 Shackles

3/8 in. x 6 ft. Galvanized Chain and Shackles with 2 Shackles

95140

Tie Down's Galvanized Chain and Shackles set is a reliable solution for your anchoring needs. This kit includes a sturdy 3/8 in. x 6 ft. chain and two shackles, providing essential equipment for secure anchoring. The components are hot-dip galvanized, ensuring robust durability and effective rust protection. With a working load capacity of 2,650 lbs., this set offers peace of mind when it comes to the strength and reliability of your anchoring equipment, making it an ideal choice for boat anchor accessories and applications.
View Details
1 - 34 of 34
1