close
Categories
Filter By
Brand
# users on fall restraint
Anchor Type
Color
Compatible with
Compliance
- OSHA 1910.140 & 1926.502 5
- OSHA 1910.23, 1910.25, 1910.28, 1910.29, 1910.144, 1926.451 1
- OSHA 1910.28, 1910.29 & 1926.502 4
- OSHA 1910.29 & 1926.502 28
- OSHA 1910.29(E) 1
- OSHA 1910.29, 1926.502 1
- OSHA 1910.29, 1926.502 & CSA Z259 1
- OSHA 1917.112 2
- OSHA 1917.112(D) 2
- OSHA 1926.1052 2
- OSHA 1926.1053 1
- OSHA 1926.501 3
- OSHA 1926.502 9
- OSHA 1926.502 & 1910.140 2
- OSHA 1926.502, 1910.140 & Ansi z359.6 2
Division
Gross Weight (lbs.)
- 0.07 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 2
- 11.00 5
- 11.93 1
- 1142.00 1
- 1190.00 1
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 4
- 14.00 1
- 14.27 1
- 14.43 1
- 140.00 1
- 15.19 1
- 17.00 1
- 185.00 3
- 2.00 8
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 1
- 21.00 3
- 21.50 1
- 22.68 1
- 225.00 1
- 2390.00 1
- 24.77 1
- 25.00 2
- 27.00 1
- 275.00 1
- 28.00 1
- 29.00 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 32.93 1
- 33.00 3
- 349.74 1
- 35.00 1
- 36.87 1
- 37.00 2
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 42.00 2
- 42.53 1
- 430.00 1
- 494.00 1
- 5.00 1
- 5.22 1
- 517.00 1
- 55.70 2
- 56.00 1
- 58.00 2
- 6.00 1
- 61.00 1
- 630.00 1
- 65.00 1
- 687.00 1
- 70.00 1
- 750.00 1
- 8.00 2
- 825.00 1
- 9.00 1
- 902.00 1
- 999.00 2
Height (in.)
- 0.10 1
- 0.75 1
- 1.00 2
- 1.45 2
- 1.50 7
- 1.75 2
- 10.50 1
- 10.82 1
- 11.00 1
- 12.00 2
- 14.00 1
- 15.00 1
- 15.75 1
- 17.00 1
- 18.00 3
- 18.50 1
- 19.00 1
- 2.00 9
- 20.00 9
- 22.00 1
- 24.00 2
- 3.00 1
- 3.25 1
- 3.75 5
- 30.00 1
- 30.52 1
- 31.27 1
- 38.00 2
- 4.00 9
- 4.50 2
- 40.00 8
- 41.50 2
- 42.00 11
- 42.75 1
- 44.30 1
- 5.00 4
- 5.50 2
- 52.94 2
- 54.00 1
- 55.63 1
- 6.00 3
- 6.38 1
- 6.50 2
- 7.00 2
- 8.50 1
Length (in.)
- 10.00 1
- 12.75 1
- 120.00 15
- 122.00 2
- 123.46 2
- 140.00 2
- 15.35 1
- 16.00 6
- 18.00 3
- 2.00 1
- 20.00 1
- 24.00 3
- 24.50 1
- 25.00 1
- 25.59 1
- 27.00 2
- 28.00 2
- 29.00 4
- 3.00 7
- 36.30 1
- 4.00 2
- 40.00 10
- 41.00 1
- 41.25 2
- 41.50 1
- 42.00 3
- 42.25 1
- 44.00 1
- 45.92 1
- 48.00 1
- 49.00 4
- 5.00 4
- 50.00 2
- 51.00 1
- 51.61 1
- 52.14 1
- 54.00 1
- 6.00 2
- 6.25 1
- 6.50 1
- 60.00 3
- 61.00 1
- 61.66 1
- 62.80 1
- 64.75 1
- 68.51 1
- 72.00 1
- 83.00 1
- 84.00 1
- 86.00 1
- 90.00 3
Prop 65 Chemical
Prop 65 Warning Copy
Warranty
Weight (lbs.)
- 0.07 1
- 0.14 1
- 0.22 1
- 0.67 1
- 1.00 9
- 10.00 3
- 10.21 1
- 10.60 1
- 100.00 1
- 1076.00 3
- 11.00 5
- 11.93 1
- 1190.00 3
- 1200.00 1
- 1208.00 1
- 1285.00 1
- 13.00 5
- 14.27 1
- 14.43 1
- 14.51 1
- 140.00 1
- 15.19 1
- 18.00 1
- 185.00 3
- 2.00 7
- 20.00 1
- 20.27 1
- 20.68 1
- 200.00 2
- 2069.00 2
- 21.00 6
- 21.98 1
- 22.00 1
- 22.68 1
- 2200.58 2
- 225.00 1
- 23.84 1
- 24.77 1
- 25.00 1
- 25.50 1
- 26.43 1
- 27.00 1
- 27.36 1
- 275.00 1
- 28.00 1
- 29.00 1
- 3.26 1
- 30.00 2
- 300.00 2
- 31.30 1
- 32.39 1
- 33.00 3
- 34.00 1
- 35.00 1
- 350.00 1
- 36.87 1
- 37.00 2
- 38.00 1
- 39.68 1
- 395.81 1
- 4.00 2
- 4.40 1
- 4.56 1
- 4.76 1
- 41.00 1
- 42.00 2
- 430.00 1
- 46.00 1
- 494.00 1
- 5.22 1
- 517.00 1
- 55.70 1
- 56.00 1
- 58.00 3
- 6.00 1
- 6.42 1
- 630.00 1
- 687.00 1
- 69.00 1
- 7.12 1
- 7.26 1
- 7.99 1
- 750.00 1
- 8.00 1
- 811.00 1
- 825.00 1
- 999.00 2
Width (in.)
- 1.50 4
- 1.63 1
- 1.66 11
- 1.75 2
- 10.00 2
- 11.13 1
- 12.00 2
- 12.50 1
- 120.00 1
- 13.00 3
- 14.50 4
- 14.56 1
- 16.00 6
- 17.50 1
- 2.00 11
- 2.50 1
- 20.83 2
- 21.50 1
- 24.50 1
- 25.00 1
- 27.25 1
- 3.00 6
- 3.60 2
- 3.63 2
- 3.75 2
- 34.00 2
- 4.00 2
- 4.50 1
- 40.00 1
- 42.00 10
- 45.21 2
- 46.00 1
- 48.00 10
- 49.50 1
- 53.20 1
- 56.00 1
- 6.00 1
- 6.25 1
- 60.39 1
- 61.20 2
- 7.50 1
- 8.00 3
- 84.00 1
- 85.19 1
- 9.50 1
Tie Down - Safety
168 items
SlabKlamp Slab Grabber Guardrail System, Yellow
70818Y
Tie Down's Slab Gripper is the ideal solution for concrete decking work. With its quick and straightforward installation, it easily adjusts to accommodate concrete slabs up to 24 inches. This gripper includes a backup safety pin for added security. It's designed for compatibility with 2x4 wood rails and even comes equipped with a toe board receiver. It meets OSHA 1926.502 compliance standards, ensuring a safe and reliable choice for your concrete decking needs.
- USD
Juggernaut Lite Kit - Yellow with 20-10 ft. Rails and 21 Socket Bases
73053Y
- USD
Galvanized Stack Pallet Kit - 11 10 ft. Guardrails & 12 UCC Bases
71783
Engineered to hold 11 Universal Guardrails and 12 UCC Bases on a reinforced metal rack, the Stack Rack Kit includes up to 110 linear feet of guardrail protection, depending on the kit purchased. With its ability to stack perfectly for either side loading of a flatbed or end loading for a closed trailer, the Stack Rack’s metal frame allows three bundles of guardrails to be stacked for utmost convenience, allowing you to ship more linear feet per truckload than any other guardrail system
- USD
12 in. Post Height x 12 in. Base Forged Eye Commercial Roof Anchor (CRA)
70864-L12
Tie Down’s 12 in. Post Height x 12 in. Base Forged Eye Commercial Roof Anchor (CRA) is a compact yet powerful fall protection solution, designed for commercial and industrial applications. This anchor features a forged eye anchor point, providing a fixed tie-off connection for lifelines and fall arrest applications. The 12-inch post height allows for low-profile installation, making it ideal for confined spaces or applications where minimal elevation is required. The bolt-on attachment system ensures secure and stable mounting to concrete surfaces using eight included fasteners. Made from high-strength galvanized steel, this anchor is built for durability and meets ASTM standards.
- USD
18 in. Post Height x 12 in. Base Forged Eye Commercial Roof Anchor (CRA)
70870-L12
- USD
18 in. Post Height x 12 in. Base Swivel Loop Commercial Roof Anchor (CRA)
70870-S12
Tie Down’s 18 in. Post Height x 12 in. Base Forged Eye Commercial Roof Anchor (CRA) is engineered to provide fixed, high-strength fall protection for commercial and industrial applications. Featuring a forged eye anchor point, this anchor delivers a secure, durable connection for lifelines, self-retracting lifelines (SRLs), and personal fall arrest systems. The 18-inch post height offers optimal clearance, ensuring ease of use with various safety systems. The bolt-on design secures firmly to concrete surfaces with eight included fasteners, making installation both simple and dependable. Constructed from galvanized steel that meets ASTM standards, this anchor is built to withstand the toughest job site conditions.
- USD
12 in. Post Height x 12 in. Base Swivel Loop Commercial Roof Anchor (CRA)
70864-S12
Tie Down’s 12 in. Post Height x 12 in. Base Swivel Loop Commercial Roof Anchor (CRA) is a versatile fall protection anchor designed for commercial and industrial rooftops. This anchor features a swivel loop anchor point, providing 360-degree movement for maximum worker mobility while ensuring secure tie-off. With a 12-inch post height, this model offers a low-profile solution, making it ideal for applications where reduced elevation is required. The bolt-on attachment system ensures a strong and stable connection to concrete surfaces with eight included fasteners. Constructed from heavy-duty galvanized steel, this anchor meets ASTM standards for long-lasting durability.
- USD
5 ft. Yellow "D" Return Guardrail
70778
Tie Down's 5 ft. Yellow D Return Guardrail enhances safety for the Universal Guardrail System, making it ideal for ladder entry and exit points. Designed to integrate with the Universal or Gator Guardrail Base, it completes a reliable passive fall protection solution. Made in the USA with premium materials, the D Rail provides a secure "end" to any guardrail system. This design highlights Tie Down's commitment to safety and quality.
- USD
Zip Warning Line Cart
72849
Tie Down's Zip Warning Line Cart is a practical and efficient solution for deploying warning lines on construction sites. Designed for ease of use, this cart simplifies the setup of warning lines that set boundaries for hazardous areas and establish safe work zones. With a user-friendly design, the Zip Warning Line Cart allows for quick deployment and retraction of warning lines, streamlining the process of adapting workspaces to changing project needs. Its mobility and compact structure make it an ideal companion for construction professionals seeking a convenient and reliable tool for implementing safety measures on-site.
- USD
Yellow 7.5-10 ft Adjustable Toeboard
73064
Tie Down's Adjustable Toeboards offer an affordable and effective solution for preventing tools and objects from rolling off elevated platforms or roofs to lower levels. Designed to address the heightened risk associated with working near unprotected edges, these toeboards meet OSHA requirements for fall protection, particularly when employees on lower levels could be exposed to falling objects. With the ability to withstand 50 lbs. of force, these toeboards ensure a secure barrier. Available in two size options (4-7.5 ft. or 7.5-10 ft.), the quick installation process adds to their convenience while the maintenance-free application ensures a durable and reliable solution for enhancing workplace safety. Additionally, the adjustable toeboards elevate the appearance of the guardrail system, combining functionality with a professional aesthetic.
- USD
Yellow 4-7.5 ft. Adjustable Toeboard
73065
Tie Down's Adjustable Toeboards offer an affordable and effective solution for preventing tools and objects from rolling off elevated platforms or roofs to lower levels. Designed to address the heightened risk associated with working near unprotected edges, these toeboards meet OSHA requirements for fall protection, particularly when employees on lower levels could be exposed to falling objects. With the ability to withstand 50 lbs. of force, these toeboards ensure a secure barrier. Available in two size options (4-7.5 ft. or 7.5-10 ft.), the quick installation process adds to their convenience while the maintenance-free application ensures a durable and reliable solution for enhancing workplace safety. Additionally, the adjustable toeboards elevate the appearance of the guardrail system, combining functionality with a professional aesthetic.
- USD
Juggernaut Kit - Yellow with 22 10 Ft. Zip Rails and 23 Socket Bases
70895
- USD
Stack Pallet Kit - 11 Galvanized 7.5 ft. Guardrails & 12 Socket Bases
70782G
The Tie Down Guardrail Stack Pallet Kit provides a convenient and efficient solution for storing and transporting guardrails and socket bases. The kit includes a sturdy pallet with a metal frame that is designed to securely hold up to 11 guardrails and 12 socket bases. The guardrails are designed to stack, allowing for easy loading from either the side or the end of the pallet. The Stack Rack, featuring a durable metal frame, enables multiple pallets to be stacked up to three racks high, optimizing storage space. With this kit, organizing and moving guardrails and bases is a breeze, ensuring easy accessibility and reducing clutter on job sites.
- USD
Juggernaut Lite Kits - Galvanized with 22 10 Ft. Guardrails - 23 Quick Set & 23 Zip Bases Part
73053G
- USD
Juggernaut Kit with Casters - Galvanized with 22-10 ft. Rails and 23 UCC Bases
70899GC
- USD
Juggernaut Kit - Galvanized with 22-10 ft. Rails and 23 UCC Bases
70899G
- USD
Juggernaut Kit with Casters - Yellow with 22-10 ft. Rails and 23 UCC Bases
70899C
- USD
Juggernaut Kit - Yellow with 22-10 ft. Rails and 23 UCC Bases
70899
- USD
Zip Rail Stanchion
70728
- USD
Gravel Stop Bracket
70723
- USD
Compression Bracket & Gravel Stop
70725
- USD
Adjustable 32 - 48 in. Zip Rail
70731
- USD
Adjustable 5-8 ft. Zip Rail
70732
- USD
10 ft. Zip Rail
70733
- USD
Zip Rail Corner Bracket
70730
- USD
Safety Locking Pin for Guardrails and Zip Rail Systems
10500
- USD
Galvanized 7.5 ft. Ladder Guardrail Corral
72883G
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends 7.5 o onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
Galvanized 15 ft. Ladder Guardrail Corral
72884G
Designed for fixed ladder access, this ladder guard system ensures the safety of ladder users by providing a protected and enclosed high-visibility barrier when climbing onto the roof and passing through swing gates. The clamp-on system attaches to the ladder's vertical rails and extends 15 ft. onto the roof, creating a barrier between the worker and the roof edge during ladder area entry or exit.
- USD
44.3 in. x 62.8 in. x 56 in. BreezeThru Forklift Work Platform
39008
The Tie Down BreezeThru Forklift Work Platform prioritizes safety, making it the ideal solution for various overhead work applications. Designed to meet workplace safety requirements, this work platform is perfect for environments such as warehouses, farms, and workshops where traditional ladder use may be challenging, unsafe, or impractical. With its secure attachment to forklift forks using two safety pins, you can trust that the work platform will remain stable and reliable throughout your tasks. Safety is further enhanced by the compatibility with fall arrest anchorages, ensuring a secure environment for up to two workers or with a remarkable 1,000-pound capacity. The slip-resistant flooring of the work platform ensures stability and traction, minimizing the risk of accidents or falls while working at elevated heights. Convenience is key, as the BreezeThru Forklift Work Platform can easily be disassembled for efficient storage and transportation, providing flexibility and versatility for your workspace.
- USD
Juggernaut Lite Kit - Yellow with 20-10 ft. Rails and 21 UCC Bases
73054Y
- USD
Juggernaut Lite Kit - Galvanized with 20-10 ft. Rails and 21 UCC Bases
73054G
- USD
Juggernaut Lite Kit - Yellow with 20-10 ft. Rails and 21 UCC Bases
73054
- USD
Juggernaut Kit - Yellow with Caster and 22 10 Ft. Zip Rails and 23 Socket Bases
70895C
- USD
Juggernaut Kit - Galvanized with Casters and 22 10 Ft. Zip Rails and 23 Socket Bases
70895GC
- USD
Juggernaut Kit - Galvanized with 22 10 Ft. Zip Rails and 23 Socket Bases
70895G
- USD
4 ft. - 7.5 ft. Platform Crossover Toeboard
73068
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
5.5 ft. - 9.75 ft. Platform Crossover Toeboard
73067
Tie Down's Crossover Toeboards offer a sophisticated alternative to the traditional use of 2x4s in our Crossover system, providing not only a cleaner aesthetic but also compliance with OSHA's toeboard standards. Engineered to sustain up to a 50 lb. load, these toeboards prioritize safety while enhancing the visual appeal of elevated workspaces. With two size options available—4 ft. - 7.5 ft. and 5.5 ft. - 9.75 ft.—users can choose the appropriate length for their specific requirements. Additionally, the toeboards come in either pre-galvanized or safety yellow powder-coat finishes, offering durability and corrosion resistance. Designed to replace 2x4s for a streamlined appearance, these Crossover Toeboards are available in two weight variants: 15 lbs. (73067) and 11 lbs. (73068), providing a versatile and reliable solution for elevated work platforms.
- USD
Crossover Bridge - Fall Protection Walkway
729XX
Tie Down's OSHA-compliant Crossover Bridge is designed to enhance safety in hazardous areas, providing a stable and secure walkway for workers to avoid contact with hazards such as conveyors, machinery, and pipes. Constructed from durable, powder-coated steel, this bridge supports weights of up to 500 lbs. It can be extended from 45 in. to 113.25 in. and includes an 8 in. step rise, a 40° climb angle, 42 in. high guardrails, and slip-resistant tread steps. The bridge is available with steps or ladders ranging from 30 in. to 70 in. in height. The adjustable legs with floor mounting options ensure stability on any job site. This Crossover Bridge meets all applicable OSHA and ANSI standards, making it a reliable and safe choice for your projects. For customization to fit your job site and specific needs, please fill out the order form.
- USD
Standing Seam Guardrail Assembly
70838
Tie Down's Standing Seam Guardrail Assembly is expertly crafted for standing seam roofs, serving as an essential component for constructing robust guardrails. The kit includes universal S-5 seam clamps, ensuring compatibility with various standing seam roof types. The base features slots that provide adjustability to fit different seam spacing, offering flexibility in installation. As part of the Zip Rail Fittings system, it acts as a foundational element for assembling reliable guardrails on elevated surfaces. Users have the option to customize their assembly by incorporating alternative Zip Rail Fittings beyond what is included in the kit, allowing for tailored configurations. The Standing Seam Guardrail Assembly includes the Standing Seam Guardrail Base (70838-1) and all necessary hardware, providing a comprehensive solution for creating secure guardrails on standing seam roofs.
- USD
Tie Down Engineering Hatch Mate | Universal Roof Access Hatch System | Roofing Hatch Safety Tools edit
73057
Tie Down’s Hatch Mate is the first roof hatch system to ensure universal mounting on either side of interior fixed ladders by requiring only six fasteners for attachment. Shipped fully assembled, its innovative design uses a chain mounted to an actuation pulley. This chain can be shortened or lengthened for roof heights up to 28 ft. Engineered for ease of use, this pulley system requires only several pulls on the chain to unlock and open the upper roof hatch and several pulls on the opposite side of the chain to close the hatch. To ensure permanent closure, the operator only needs to place the chain into the lock mounting bracket and lock with a standard lock and key.
- USD
Hatch Railing 96 in. x 30 in.
71084
The Hatch Railing Complete Kit by Tie Down is your comprehensive solution for meeting fall protection standards and enhancing safety around roof and floor openings. This “best in class” out of the box system eliminates the hazard of exposed sides of ground openings. This lightweight guardrail system provides floor opening fall protection for anyone working in or around dangerous gaps on walking and working surfaces. OSHA 1910.23 requires guardrail protection around exposed openings on any walking and working surfaces. If not protected properly, citations and injury could occur. The Hatch Railing Complete Kit is made of metal and coated with our proprietary Safety Yellow coating. Utilizing our aluminum drop in fittings, installation time is within minutes. The self-closing gate is manufactured with a heavy-duty spring, ensuring continuous closure of the hatch gate. The pipe ends and tops feature a plastic fitting. The bolts and washers are 3/8” x 2-1/2” grade Z, zinc plated. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
Hatch Railing Complete Kit 54 in. x 30 in.
71095
The Hatch Railing Complete Kit by Tie Down is your comprehensive solution for meeting fall protection standards and enhancing safety around roof and floor openings. This “best in class” out of the box system eliminates the hazard of exposed sides of ground openings. This lightweight guardrail system provides floor opening fall protection for anyone working in or around dangerous gaps on walking and working surfaces. OSHA 1910.23 requires guardrail protection around exposed openings on any walking and working surfaces. If not protected properly, citations and injury could occur. The Hatch Railing Complete Kit is made of metal and coated with our proprietary Safety Yellow coating. Utilizing our aluminum drop in fittings, installation time is within minutes. The self-closing gate is manufactured with a heavy-duty spring, ensuring continuous closure of the hatch gate. The pipe ends and tops feature a plastic fitting. The bolts and washers are 3/8” x 2-1/2” grade Z, zinc plated. Tie Down Safety maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
Tilt-Back Pallet Carrier Cart
73058
Tie Down's Tilt Back Pallet Carrier is a versatile and efficient solution for transporting a range of materials, from insulation to rubber rolls, with ease. Its large tires enable smooth movement on all types of decks, making it a valuable asset in various settings. The rear wheels are adjustable to change the tilt, providing enhanced control during transportation. This carrier isn't limited to traditional warehouse tasks; it's equally adept on job sites, effortlessly moving portable restrooms, water storage tanks, toolboxes, and more. Effortless maneuvering is ensured by the multi-piece formed handle and multi-axis casters, offering easy mobility on all surfaces. Safety is a top priority with the pinned caster lock preventing unwanted rotation and ensuring stability on sloped surfaces. The flat-free tires deliver reliable performance without the need for maintenance, and the all-steel frame guarantees long-lasting durability. With its adjustable tilt feature, the Tilt Back Pallet Carrier provides a safe and efficient transport solution for a variety of materials in diverse work environments.
- USD
Standard Materials Cart - 2000 lb capacity
72827
This robust and versatile base frame is designed to streamline material transport on the job site. It ensures stability and durability on various terrains while remaining easy to maneuver and secure materials during transportation. This cart combines strength and functionality to meet the demands of demanding job sites, providing a dependable solution for efficient material handling.
- USD
4-Person Horizontal Lifeline System
14405
The 3-Person Horizontal Lifeline System is a robust kit that offers enhanced fall arrest capabilities, ensuring the safety of multiple individuals working at heights. With the ability to support up to 3 workers simultaneously, it minimizes the risk of accidents and injuries by providing reliable fall arrest support. The system is compatible with 2 Squatch units, allowing for seamless integration and increased versatility in various work environments. This compatibility enables the creation of a comprehensive fall protection solution tailored to the specific needs of your work site. By combining the Horizontal Lifeline System with Squatch units, you can ensure reliable and efficient fall protection for your team.
- USD
30 Inch Wide Super Steps - Full kit - 3 Modules and Pallet
72918
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
40 Inch Wide Super Steps - 3 Modules and Pallet
72920
Tie Down Safety’s Super Steps Portable Stair System provides a safer alternative for ladders on job sites. The Super Step is faster and safer than ladders when workers require reliable access between project floors. Super Steps replace traditional wooden worksite steps or standard ladders. They are easier to set up, easier to inspect, fully adjustable, and can be used in any location on the job site. The Super Step arrives on the job site, ready to use right out of the box. The 48” x 140” frame holds up to three modules and can be stacked three high when in transit or being stored. The best quality is the Super Steps mobility and quick setup. The Super Steps can move from one location to another and be set up quickly. Once it is in position, the Super Steps eliminate the need to build and maintain temporary ladders. The Super Steps comes with auto-fold side rails and is 100% OSHA compliant. Workers, safety specialists, insurance companies, and building owners embrace this convenient and highly functional option to ladders. It is the preferred best practice when moving workers between project floors.
- USD
PX5 Original Penetrating Mobile Fall Protection System Supports 7 Workers
72838
Tie Down manufactures the best-in-class mobile fall protection systems. Contractors often need safety solutions that offer versatility while being easy to use. The revolutionary PX5 ships job-site ready and safely protects up to seven workers at a time. Weighing less than 550 lbs., the PX5 provides fall arrest safety for 5 workers and an additional 2 workers in restraint, all at the same time. With front and rear braking, the PX5 is engineered to penetrate the substrate in the event of a fall. The 1st and 5th tie-off points provide a 45-degree angled use making the PX5 the only system on the market tested at such an angle.
- USD
PX5 Sentinel Penetrating Mobile Fall Protection System Supports 7 Workers
72833
As pioneers in crafting exceptional mobile fall protection systems, we proudly introduce the PX5 Sentinel – a versatile and efficient solution designed to protect up to seven workers simultaneously. Its impressive capacity secures 5 workers in fall arrest and 2 in restraint, guaranteeing comprehensive on-site safety. Weighing less than 1300 lbs., it effortlessly combines protection and mobility. Crafted for easy integration across various surfaces, including concrete, EPDM, and TPO roofing applications, the PX5 Sentinel proves its adaptability in diverse work environments. Equipped with premium flat-free tires, front locking tow handle, rolled goods rack, forklift pockets, and more, it's a system that ensures both safety and efficiency. The PX5 Sentinel meets OSHA 1926.502 and ANSI/ASSE Z359.6-2009(D) standards, ensuring peace of mind and adhering to the highest industry benchmarks. Additionally, valuable add-ons like a fire extinguisher holder, a material box with locking door, weather strip, and heavy-duty hinge, and an optional rescue winch offering 100 ft. of galvanized liftline enhance equipment security. Crafted with precision and quality raw materials made in the USA, the PX5 Sentinel is a reliable partner for any job site. Its large footprint of 48” x 90” provides ample working space while delivering exceptional protection.
- USD
Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail
70850
The Adjustable Guardrail by Tie Down Safety offer you the best option for closing the gaps on every safety guardrail system. The length adjusts on site to achieve the perfect fit. No tools required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid rail allows the push and pull adjustment of this safety guardrail system. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Adjustable 5.5 ft. - 7.5 ft. Roof Guardrail
70851
The Adjustable Guardrail by Tie Down Safety offers you the best option for closing the gaps in every safety guardrail system. The length adjusts on-site to achieve the perfect fit. No tools are required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at the top and mid-rail allows this safety guardrail system’s push and pull adjustment. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Adjustable 8 ft. - 10 ft. Roof Guardrail
70852
The Adjustable Guardrail by Tie Down Safety offers you the best option for closing the gaps in every safety guardrail system. The length adjusts on-site to achieve the perfect fit. No tools are required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid-rail allows this safety guardrail system’s push and pull adjustment. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Galvanized Steel with Coating Collapsible Guardrial
70854
Tie Down's Collapsible Guardrail is your lightweight and portable solution for roofing safety. With its collapsible bracket design featuring two safety pins (included), installation is hassle-free with no tools required. The non-penetrative design ensures your roof's integrity remains intact. It's easy to collapse and reset, and if needed, it can provide a sturdy, permanent raised fit. Made from galvanized steel with a coating, this guardrail is not only robust but also resistant to the elements. Its hinged brackets allow the guardrail to fold back easily, never towards the roof edge, ensuring maximum safety during rooftop operations. With a product weight of just 33 lbs., it offers both convenience and durability for all your roofing safety needs.
- USD
187 and .250 Diameter Screen STS Screen
71056
The Tie Down 7 & 5MM 4FT STS Screen (48x48) is a non-penetrating skylight safety solution designed to prevent falls while preserving the structural integrity of the skylight. Engineered for quick and secure installation, this OSHA-compliant system uses a clamp-based mounting method with threaded rods, aluminum extrusions, and retaining clips, eliminating the need for drilling. The heavy-duty 7mm & 5mm diameter wire construction provides long-lasting strength and protection in commercial and industrial environments.
- USD
Stack Pallet Kit - 11 Galvanized 10 ft. Guardrails & 12 Socket Bases
70783
Tie Down's Galvanized Guardrail Stack Pallet Kit offers a convenient and organized solution for storing and transporting guardrails and socket bases. The kit includes a sturdy pallet with a metal frame that can securely hold up to 11 guardrails and 12 socket bases. The guardrails are designed to stack, allowing for easy side loading or end loading onto the pallet. The Stack Rack, with its durable metal frame, enables the stacking of multiple pallets up to three racks high, optimizing storage space. Available in galvanized, this kit provides a practical and efficient way to manage and transport guardrails and bases, ensuring easy accessibility and minimizing clutter on job sites.
- USD
Juggernaut Cart, Yellow
70794
Tie Down's Juggernaut is a robust and innovative passive fall protection system designed for optimal safety on the job site. This mobile guardrail cart features a heavy-duty Mobile Transport Cart capable of storing up to 220 linear feet of Tie Down's Universal Guardrail. Its double-stacking capability provides added convenience, making it suitable for those with space limitations. The Juggernaut is available in two finishes, including Tie Down's proprietary Plascoat finish for enhanced durability or a galvanized finish. For easy maneuverability and relocation, the system includes forklift pockets on both ends and lifting rings that enable lifting with a crane. With its versatility and sturdy construction, the Juggernaut ensures a reliable and efficient solution for passive fall protection in various work environments.
- USD
Adjustable Guardrail Outer Sleeve for 8 ft. to 10 ft. Guardrail
70796
The Adjustable Guardrail Outer Sleeve by Tie Down is a component part for the Adjustable Guardrail System. The Out Sleeve allows the easy connection of two sides of a guardrail. The length adjusts easily, on a job site, to achieve the perfect fit. No special tools required! Accommodate any gaps in a guardrail system or block off any obstructions with the Adjustable Guardrail and the Outer Sleeve. Tie Down offers more than adjustability. The telescoping system eliminates the need for tools or pins. The telescoping tube rail allows the push and pull adjustment of the Adjustable Guardrail System. Choose from three Outer Sleeve options: 3.5-5 ft., 5.5 ft.-7.5 ft., and 8-10 ft. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA
- USD
EZ-Store Warning Line System
65016
Tie Down's EZ-Store Warning Line System offers a low-cost warning line system for low slope commercial roofs. This out-of-the-box system keeps others alert and aware of unprotected edges. The 4-stanchion product installs in minutes and works on all sides of a roof. Constructed with heavy-duty galvanized steel tubing, this warning line system is resistant to rusting. The easy setup and breakdown of the EZ-Store Warning Line System are due to the interlocking leg pins and vertical stanchion tubes. The side handle also makes for easy transportation. This complete set includes four stanchions with 100’ of warning line pennants. Choose this durable and easy-to-use system today. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Guardrail Material Cart
65049
Designed to easily transport Universal Guardrails with bases and other various roofing materials across construction sites or rooftops, this cart ensures the safe and efficient movement of guardrails across the rooftop.
- USD
Yellow Stack Pallet Kit - 11 10 ft. Guardrails & 12 UCC Bases
71762
Tie Down's Universal Guardrail Stack Rack Kit with UCC Bases includes 11 guardrails and 12 bases, offering a robust safety setup for your worksite. Weighing in at 40% of the weight of most competitors, it's significantly lighter without compromising on strength and durability. The Universal Guardrail included in this kit is designed to provide unparalleled freedom of movement for workers. Unlike active fall protection systems, which often require harnesses and lanyards, this guardrail system allows employees to perform their tasks without hindrance. Our Universal Compression Clamp (UCC) Bases are the heart of this system. They seamlessly integrate with over 95% of competitor upright guardrails, eliminating the need for pins. Installation is hassle-free with the simple use of an impact gun, ensuring a secure and wobble-free system. These bases are versatile, accommodating both 1.66 and 1.90 OD tubes, and are meticulously crafted from high-quality raw materials and components sourced exclusively from the USA. For added convenience, these bases stack three at a time, reducing shipping costs and simplifying storage. You can also opt for the grommeted padding feature for enhanced protection. Plus, this system is suitable for use on roofs with pitches of up to 2/12, ensuring OSHA compliance and comprehensive safety on your worksite.
- USD
Safe-T-Zone Permanent Warning Line System
65084
From warehouses to industrial sites and construction zones, Tie Down's Safe-T-Zone Permanent Warning Line System provides enhanced safety without the need for fall arrest or horizontal lifeline functionality. The system's stackable heavy-dipped galvanized base plates weigh 50 lbs. each, delivering stability and resilience. Featuring convenient handles on the bases, this portable system guarantees swift setup and breakdown across different work areas. This system includes customizable warning flags spaced at 6-foot intervals on a safety yellow vinyl-coated 5/32 cable available in a variety of colors featuring laser-cut "Danger," meeting OSHA regulations. Practical and straightforward, this permanent warning line system is ideal for areas with irregular or infrequent work activity. It effectively safeguards controlled access, prevents unauthorized entry, and clearly alerts workers to potential hazards.
- USD
Yellow Stack Pallet Kit - 11 5 ft. Guardrails & 12 UCC Bases
71792
- USD
Penetrator Retraction Tool Cable - Penetrating Fall Protection
72842
- USD
Adjustable 3.5 ft. - 5 ft. Galvanized with Coating Roof Guardrail
70850G
The Adjustable Guardrail by Tie Down Safety offer you the best option for closing the gaps on every safety guardrail system. The length adjusts on site to achieve the perfect fit. No tools required! Accommodate any gaps, terminate the run at a wall, or block off any obstruction with the Adjustable Guardrail. Tie Down Safety offers more than adjustability. The simple telescoping system eliminates the need for tools or pins. The telescoping tube rail at both the top and mid rail allows the push and pull adjustment of this safety guardrail system. Choose from three adjustable options: 3.5-5’, 5.5-7.5’, and 8-10’. Tie Down Safety maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
8 in. Commercial Roof Anchor
70861-L16
Tie Down's Commercial Roof Anchor is a reliable, easy-to-install, and versatile solution for ensuring the safety of workers in environments where fall protection is essential. Its robust construction and regulatory compliance make it a valuable addition to your safety equipment arsenal. Crafted from durable steel and featuring a galvanized finish, this roof anchor is engineered to provide a secure and dependable attachment point for various fall protection systems. This anchor is a versatile addition to your safety equipment. It can be employed as a crucial component of a fall arrest system or for tasks like window washing, ensuring safety for workers in high-risk environments. The Commercial Roof Anchor is designed to work seamlessly with a range of fall protection equipment, including retractable lifelines, vertical lifelines, rope grab units, and horizontal lifeline systems. Its versatility makes it suitable for various applications. This anchor meets compliance with OSHA 1910 and OSHA 1926 Subpart M regulations, giving you peace of mind regarding safety and regulatory adherence. The roof anchor extends through the roof, making it accessible during and after construction. Its design ensures that it fits a wide range of fall protection applications. The riser height can be adjusted from 8 in. to 36 in., providing flexibility to meet your specific needs.
- USD
Fitting Al Open End
13705A
Tie Down's Zip Rail Fittings offer versatile solutions for safety rail systems. These fittings are available in steel piping with various color options including yellow, black, blue, and galvanized. They are designed for easy installation without the need for special tools and are constructed from durable cast iron or aluminum materials. Compatible with safety yellow, galvanized, or custom color safety rails, these fittings meet OSHA compliance standards. They provide flexibility for designing both interior and exterior safety rail systems, allowing users to customize layouts to suit specific applications and requirements.
- USD
Adjustable 5 ft. - 7 ft. Galv Wheeled Guardrail Gate & Latch Kit
70908G
Tie Down's Wheeled Guardrail Gate and Latch Kit is the lightweight and portable solution to enhance rooftop safety. Weighing only 42 lbs., it offers an affordable and highly versatile option for your job site. This kit easily bolts and mounts onto round or square guardrail tubes, providing quick installation with all necessary components included. With an adjustable length range from 70 in. to 85 in., it effectively protects access points like roof hatches, skylights, fire vents, or floor doors. The self-closing gate is constructed with durable steel, ensuring compliance with OSHA 1926.501(b)(1) and ANSI/ASSP A1264.1-2017 standards for rooftop safety. Choose from Yellow or galvanized options to suit your specific needs.
- USD
Jamb Door/ Window Anchor, 1-Pack
65078Z
The Door and Window Jamb Anchor by Tie Down Engineering acts as a portable fall protection anchor point designed for fall arrest. The design works in locations where a door or window frame provides a safe, secure, and temporary fall protection anchor point. This Door and Window Jamb Anchor fits openings from 24 inch to 52 inch wide and offers a simple installation. The fully adjustable and lightweight design makes for an easy fall protection anchor point. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Cast Iron And Aluminum Options Zip Rail Pipe Fittings 10 Ft. Pipe Galvanized Part Id: 70836-120g
70836-120G
Tie Down's Zip Rail Pipe Fittings are the epitome of strength and durability, available in your choice of either aluminum or steel cast materials. When paired with our galvanized rail sections, they create an exceptionally robust and enduring safety solution. Our Zip Rail Pipe Fittings can be used with safety yellow, galvanized, or even custom-colored safety rails, allowing you to tailor your guardrail system. To simplify the procurement process, Tie Down offers convenient kit options for the Zip Rail Fittings. These kits encompass all the essential components required for a comprehensive guardrail system, making it easy for users to acquire everything they need in a single package. Whether you opt for a DIY installation or enlist a contractor, you'll appreciate the straightforward setup process as no special tools are necessary, and the sections install rapidly. From industrial facilities and commercial buildings to construction sites and public spaces, these fittings empower you to create effective safety railings wherever they are needed.
- USD
Galvanized 12 Plate Hippo Anchor Deadweight System
65219G
The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
- USD
Galvanized 16 Plate Hippo Anchor Deadweight System
65220G
The ultimate solution for rooftop fall protection without the need for roof penetration, Tie Down's Hippo Anchor Deadweight System offers exceptional fall arrest and fall restraint capabilities, ensuring the safety of workers at heights. Crafted with precision, it's designed to prevent leaks and protect your roof from damage, making it an ideal choice for both temporary and permanent applications. Choose between the 12-plate configuration, which requires a 10-foot distance from the leading edge, or the 16-plate configuration with an 8-foot leading edge requirement, depending on your specific needs. This system meets stringent compliance standards, including OSHA 1926.502, ASSE Z359.1, CSA 259, and Military Code EM 385-1, ensuring peace of mind regarding safety and regulatory adherence. The central anchor is strategically raised to minimize fall travel distance, further enhancing safety. This system is compatible with lanyards with a maximum arresting force of 900 lbs. and can be used with roofs with up to a 5° pitch.
- USD
Cast Iron And Aluminum Options Zip Rail Pipe Fittings 8 Ft. Pipe Galvanized Part Id: 70836-96g
70836-96G
Tie Down's Zip Rail Pipe Fittings are the epitome of strength and durability, available in your choice of either aluminum or steel cast materials. When paired with our galvanized rail sections, they create an exceptionally robust and enduring safety solution. Our Zip Rail Pipe Fittings can be used with safety yellow, galvanized, or even custom-colored safety rails, allowing you to tailor your guardrail system. To simplify the procurement process, Tie Down offers convenient kit options for the Zip Rail Fittings. These kits encompass all the essential components required for a comprehensive guardrail system, making it easy for users to acquire everything they need in a single package. Whether you opt for a DIY installation or enlist a contractor, you'll appreciate the straightforward setup process as no special tools are necessary, and the sections install rapidly. From industrial facilities and commercial buildings to construction sites and public spaces, these fittings empower you to create effective safety railings wherever they are needed.
- USD