close
Categories
Filter By
Brand
# users on fall arrest
# users on fall restraint
Country of Origin
Division
Length (EA)
- 10.00 1
- 10.25 2
- 100.00 1
- 11.00 1
- 12.00 1
- 120.00 1
- 122.00 1
- 138.00 1
- 148.00 1
- 17.00 1
- 2.50 1
- 20.00 1
- 21.50 2
- 23.00 1
- 25.00 3
- 26.00 2
- 27.50 1
- 28.50 1
- 29.75 1
- 30.00 2
- 32.00 1
- 33.00 2
- 34.00 2
- 36.50 1
- 4.00 3
- 40.00 2
- 41.00 1
- 42.00 2
- 47.50 3
- 48.00 1
- 49.38 1
- 5.00 2
- 50.00 1
- 54.00 2
- 54.50 2
- 61.00 5
- 7.00 8
- 70.00 1
- 9.00 3
Warranty
11.00, 122.00 - Roofing
2 items
4-Way Roof Anchor Plate for 1 Worker in Fall Arrest and 2 Workers in Fall Restraint | 4 Connection Points
65080
The 4-Way Roof Anchor by Tie Down Engineering provides an anchor plate that offers a fall protection anchor point for one worker in fall arrest or two workers in fall restraint. The multidirectional 4-Way Roof Anchor resulted from collaboration between roofing contractors who require the ability to move in multiple directions while using a single tie-off point. The four connection points increase the worker’s range of motion, allowing the worker to detach from one connection point to the next. This anchor plate works for both fall arrest and fall restraint. This product’s design makes it compatible with metal, wood, and concrete applications. A horizontal lifeline system works due to the 90° angles between each anchor point on the anchor plate. Tie Down maintains high standards and quality control through quality raw materials and components made in the USA.
- USD
Heavy Duty 16 ft. Wall Jack, 1000 lb. capacity (per pair), 2 pack
48581
The Wall Jacks by Tie Down offer the safest and most efficient way to lift walls into a vertical position. These wall lifting jacks are constructed of heavy-duty steel tubing and are available in 16 ft., 20 ft., and 23 ft. lengths. After lifting the walls, the Wall Jack combined with the Wall Brace secures the wall into a vertical position. This product safely lifts sheathed walls up to 70 ft. tall. The 10 ft. adjustable brace uses a heavy-duty, 1 in. zinc-plated steel square tube. The head has a 12 in. long ¾ in. diameter fast turn screw and the foot offers a 360° swiveling bracket with no wobble. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
1 - 2 of 2
1