close
Filter By
Brand
Country of Origin
Division
Gross Weight (lbs.)
- 0.35 1
- 0.50 4
- 1.00 8
- 1.13 1
- 1.50 1
- 1.55 1
- 1.92 1
- 10.00 4
- 100.00 1
- 11.00 4
- 12.00 4
- 12.12 1
- 14.00 1
- 140.00 1
- 15.00 1
- 16.00 1
- 160.00 1
- 2.00 4
- 2.20 1
- 2.50 3
- 2.66 1
- 2.80 1
- 21.00 1
- 220.00 2
- 221.00 1
- 225.00 1
- 23.00 1
- 230.00 1
- 25.00 2
- 3.00 4
- 3.50 2
- 300.00 3
- 31.53 1
- 325.00 1
- 35.00 1
- 350.00 3
- 37.50 1
- 4.00 4
- 4.44 2
- 40.00 1
- 5.00 5
- 5.34 1
- 5.50 1
- 50.00 2
- 51.00 1
- 51.15 1
- 6.00 4
- 6.50 1
- 6.60 1
- 60.00 1
- 7.00 3
- 7.94 2
- 79.00 1
- 8.00 6
- 85.00 1
- 9.00 5
Height (EA)
Length (EA)
Warranty
Width (EA)
0.50, 50.00, 60.00 - Roofing
7 items
51 in. Belt for Ladder Hoists
10047
- USD
Roofing Platform TranzVolt Laddervator Pro Kit Milwaukee
40686
The updated TranzVolt G2 surpasses previous models. With an extended two-year warranty, the TranzVolt G2 system is designed to withstand demanding job site conditions. This eco-friendly and cost-efficient product now utilizes AmSteel-Blue high-performance 12-strand single braid of 100% Dyneema® fiber cable, which has extremely low stretch, superior flex fatigue, and wear resistance, and no longer requires fuel and oil. The TranzVolt G2 Roofing Kit is a great tool for lifting materials, such as shingles, rolled goods, tools, and bulk roofing materials, in tight spots or when low-noise ordinances are being enforced. It carries material 44 ft. high at a rate of 2 ft. per second, reaching the height of a two-story building in under 25 seconds. Using two standard Milwaukee Brand 18V rechargeable batteries, the Roofing Kit lifts up to 250 lbs. for eight hours.
- USD
7 Belt 51 inch (5L510) formerly #10034 50 inch
10034
- USD
Adjustable 10 ft. Wall Brace and 360 degree swiveling bracket
48580
The Adjustable Wall Brace by Tie Down saves time and money by securing preformed walls into a vertical position. Many contractors brace walls with lumber but the Adjustable Wall Brace makes this step easier. This product combined with the wall lifting jacks secures walls into position. The 10’ adjustable brace uses a heavy-duty, 1†zinc-plated steel square tube. The head has a 12†long and ¾†diameter fast turn screw. The foot has a smooth action 360° swiveling bracket with no wobble. Just a few turns of the wrist and the wall is plumb. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
1/16 in. x 50 ft. Galvanized Cable w/ Swagged Loop and Thimble
50066
- USD
Heavy Duty TranzPorter Telescopic Support Brace
60005
The TranzPorter Telescopic Support Brace by Tie Down is an accessory part for the TranzPorter ladder hoist. The Support Brace helps hold the track in place and stabilizes the system. This support component bolts directly onto the track and helps ensure a safe application lifting between 250 lbs. and 400 lbs. of material to the roof. The TranzPorter ladder hoist helps workers move shingles to the rooftop while eliminating the risks of doing it by hand or on the back. The hoist and track section assemble easily. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
1/8 in. x 100 ft. Galvanized Cable w/ Swagged Loop and Thimble
50069
- USD
1 - 7 of 7
1