close
Categories
Filter By
Brand
Country of Origin
Division
Gross Weight (lbs.)
- 0.35 1
- 0.50 4
- 1.00 8
- 1.13 1
- 1.50 1
- 1.55 1
- 1.92 1
- 10.00 4
- 100.00 1
- 11.00 4
- 12.00 4
- 12.12 1
- 14.00 1
- 140.00 1
- 15.00 1
- 16.00 1
- 160.00 1
- 2.00 4
- 2.20 1
- 2.50 3
- 2.66 1
- 2.80 1
- 21.00 1
- 220.00 2
- 221.00 1
- 225.00 1
- 23.00 1
- 230.00 1
- 25.00 2
- 3.00 4
- 3.50 2
- 300.00 3
- 31.53 1
- 325.00 1
- 35.00 1
- 350.00 3
- 37.50 1
- 4.00 4
- 4.44 2
- 40.00 1
- 5.00 5
- 5.34 1
- 5.50 1
- 50.00 2
- 51.00 1
- 51.15 1
- 6.00 4
- 6.50 1
- 6.60 1
- 60.00 1
- 7.00 3
- 7.94 2
- 79.00 1
- 8.00 6
- 85.00 1
- 9.00 5
Warranty
0.50, 23.00, 60.00 - Roofing
6 items
51 in. Belt for Ladder Hoists
10047
- USD
7 Belt 51 inch (5L510) formerly #10034 50 inch
10034
- USD
Heavy Duty TranzPorter Secondary Handle Kit for the TP Series
48468
The TranzPorter Secondary Handle Kit by Tie Down is required when using the Solar Panel Saddle Carriage. The saddle carriage blocks the foot pedal, which engages the hoist, so the Secondary Handle Kit allows the operation of the TranzPorter. This TranzPorter ladder hoist part fits on the side of the hoist to engage the motor and carriage. Highly recommended when lifting plywood, solar panels, and insulation panels, this product works with both the TP250 and TP400 models. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
1/16 in. x 50 ft. Galvanized Cable w/ Swagged Loop and Thimble
50066
- USD
Heavy Duty TranzPorter Telescopic Support Brace
60005
The TranzPorter Telescopic Support Brace by Tie Down is an accessory part for the TranzPorter ladder hoist. The Support Brace helps hold the track in place and stabilizes the system. This support component bolts directly onto the track and helps ensure a safe application lifting between 250 lbs. and 400 lbs. of material to the roof. The TranzPorter ladder hoist helps workers move shingles to the rooftop while eliminating the risks of doing it by hand or on the back. The hoist and track section assemble easily. The foot pedal and handle brake controls allow for easy and straightforward use while keeping workers safe with the safety mechanisms preventing falls. An optional 4’ or 8’ track extension can be added to the ladder hoist, allowing a maximum height of 44’. Tie Down maintains high standards and quality controls using quality raw materials and component parts made in the USA.
- USD
1/8 in. x 100 ft. Galvanized Cable w/ Swagged Loop and Thimble
50069
- USD
1 - 6 of 6
1