close
Categories
Filter By
Brand
Color
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 3
- 0.59 1
- 0.60 1
- 0.65 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.90 1
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.33 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 2
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 3
- 1.67 3
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 1.95 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 14.10 1
- 14.50 1
- 15.00 3
- 15.50 1
- 17.00 1
- 18.00 1
- 18.20 1
- 19.00 1
- 2.00 3
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 2
- 2.80 2
- 20.50 1
- 22.00 2
- 23.00 1
- 25.50 1
- 29.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 3
- 3.75 2
- 3.80 2
- 3.85 1
- 3.98 1
- 30.00 1
- 32.00 1
- 32.50 1
- 37.00 1
- 39.50 1
- 4.00 2
- 4.50 2
- 4.60 1
- 4.73 1
- 41.00 1
- 42.50 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.27 1
- 7.44 1
- 7.50 3
- 7.67 1
- 7.97 1
- 8.00 3
- 8.17 1
- 8.20 1
- 8.50 1
- 8.67 1
- 8.80 1
- 9.00 3
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
- 989.00 1
Warranty
8.50, 18.00, 42.50 - Manufactured Housing
3 items
8 Bolt Gator Clamp for Zone III and Florida
59011
Engineered for precision and stability, Tie Down's Gator Beam Clamps are a vital component for secure longitudinal strap attachment. These clamps are designed to fasten to the bottom of the main beam, offering a dependable connection point for straps on each end of the home. With a focused purpose, Gator Beam Clamps are key to facilitating the attachment of straps to the I-beam, ensuring the robust anchoring of your structure. You can achieve optimal results by determining the strategic locations for anchor and stabilizer plates as well as bracket placement on the I-beam. This meticulous planning ensures a strap angle of 45 degrees or lower for maximum effectiveness. Installing the Gator Beam Clamp is straightforward and hassle-free. Employ ½-in. grade 5 bolts and nuts to affix the clamp to the I-beam. To complete the connection, use a ½-in. grade 5 bolt and nut to attach the swivel connector and strap to the bolt closest to the anchor. Tailoring to your specific needs, these clamps cater to different wind zones. Utilize 4 bolts for wind zones 1 and 2 while opting for 8 bolts in zones 3 and Florida, ensuring steadfast stability regardless of the environment.
- USD
GROUND LONGITUDINAL HARDWARE KITS
59331
Xi2 Ground Longitudinal Hardware Kit for 2 Struts
- USD
Xi2 SYSTEM GROUND 6 FT. W/LONGITUDE STRUT & HARDWARE
59651
Complete Xi2 Lateral & Longitudinal System w/6' Strut
- USD
1 - 3 of 3
1