close
Categories
Filter By
Brand
# of users
Country of Origin
Division
Gross Weight (lbs.)
- 0.05 1
- 0.10 1
- 0.16 1
- 0.25 1
- 0.35 1
- 0.50 3
- 0.59 1
- 0.60 1
- 0.65 1
- 0.67 2
- 0.71 1
- 0.75 3
- 0.90 1
- 0.97 1
- 1.00 5
- 1.10 1
- 1.15 1
- 1.24 1
- 1.30 1
- 1.33 1
- 1.34 2
- 1.42 3
- 1.48 2
- 1.50 2
- 1.58 3
- 1.59 1
- 1.60 2
- 1.62 3
- 1.67 3
- 1.70 2
- 1.71 1
- 1.75 2
- 1.76 1
- 1.77 1
- 1.83 1
- 1.85 1
- 1.93 2
- 1.94 1
- 1.95 1
- 10.00 1
- 10.50 1
- 11.00 1
- 11.50 1
- 12.00 2
- 12.19 1
- 12.80 1
- 13.25 1
- 14.10 1
- 14.50 1
- 15.00 3
- 15.50 1
- 17.00 1
- 18.00 1
- 18.20 1
- 19.00 1
- 2.00 3
- 2.05 1
- 2.10 2
- 2.20 1
- 2.25 1
- 2.32 1
- 2.50 1
- 2.53 2
- 2.80 2
- 20.50 1
- 22.00 2
- 23.00 1
- 25.50 1
- 29.00 1
- 3.00 1
- 3.08 1
- 3.10 1
- 3.15 1
- 3.48 1
- 3.50 3
- 3.75 2
- 3.80 2
- 3.85 1
- 3.98 1
- 30.00 1
- 32.00 1
- 32.50 1
- 37.00 1
- 39.50 1
- 4.00 2
- 4.50 2
- 4.60 1
- 4.73 1
- 41.00 1
- 42.50 1
- 5.00 2
- 5.13 1
- 5.20 1
- 5.30 1
- 5.60 1
- 5.67 1
- 5.94 1
- 56.00 1
- 6.00 1
- 6.03 1
- 6.25 1
- 6.34 1
- 6.50 7
- 7.00 4
- 7.27 1
- 7.44 1
- 7.50 3
- 7.67 1
- 7.97 1
- 8.00 3
- 8.17 1
- 8.20 1
- 8.50 1
- 8.67 1
- 8.80 1
- 9.00 3
- 9.50 1
- 9.67 1
- 90.00 1
- 95.00 1
- 989.00 1
Height (EA)
Length (EA)
Warranty
Width (EA)
32.50, 2.05, 0.25 - Manufactured Housing
3 items
Anchor Adapter Head
59205
Tie Down's Anchor Adapter Head, available both with the Electric Drive Machine (EDM-20) and as a standalone replacement, simplifies anchor installations. Intended for all ground anchors, this component seamlessly attaches to the motor's shaft, ensuring a secure and straightforward setup process. Crafted from high-quality steel, the adapter head guarantees durability and reliability. Its purpose is to firmly hold the anchor head, allowing for secure placement before burying the anchor in the ground. For added convenience during installation, you can utilize a ½-inch pin or slotted bolt through the adapter head and anchor head, preventing any separation from the EDM. This feature, often referred to as the safety pin hole, enhances the overall ease and safety of the installation process.
- USD
4 in. x 6 in. x 1 in. PADS AND PIERS ABS SHIMS/WEDGES
59663
Tie Down's ABS Shims/Wedges, measuring 4 in. x 6 in. x 1 in., are expertly crafted to deliver impeccable support and alignment in pier structures. These shims excel in filling gaps and securing piers between the pier plate and main beam, ensuring a solid and level foundation for your structure. Precision is paramount. Whether it's leveling your home or bridging gaps between the base of the main beam and the top of the pier cap, our ABS Shims/Wedges deliver the perfect solution. Installation is straightforward and hassle-free. Following the placement of an 8" x 8" x 16" concrete block atop pier footings, determine the gap size between the pier and beam. This measurement dictates the number and size of shims required (minimum of 2 inches), maintaining a clearance of less than 1 inch between pier top and beam bottom. Our shims can be double-stacked—2 inches on 2 inches or 1 inch on 2 inches—to adapt precisely to your needs. For double pier plate stacks, conveniently position two cap plates side by side. ABS Shims/Wedges must be used in pairs, ensuring a reliable and uniform support system for your pier structure. Fully approved for use by HUD 3285.312(3), attesting to their superior quality and adherence to industry standards, our ABS Shims/Wedges are thoughtfully crafted from recycled ABS materials, aligning with environmentally friendly construction choices.
- USD
Xi2 SYSTEM CONCRETE 6 FT. W/LONGITUDE STRUT & HARDWARE
59654
Xi2 6' Concrete System w/ Lateral & Longitudinal Struts
- USD
1 - 3 of 3
1