Tie Down Original Penetrator Mobile Fall Protection Cart
The Penetrator Mobile Fall Protection Cart by Tie Down is the lightest mobile fall protection system available on the market.
Tie Down Original Penetrator Mobile Fall Protection Cart
Mobile Fall Protection
The Penetrator Mobile Fall Protection Cart by Tie Down is the lightest mobile fall protection system available on the market. This system penetrates a surface while ensuring minimal injury to workers.
When set up properly, the Penetrator Mobile Fall Protection System is intended for a maximum of 3 people for a fall arrest and 2 for fall restraint (averaging a combined weight of no more than 310 lbs. per person). No more than 5 persons should be hooked up at one time. When used with a body harness, the maximum arresting force is limited to 1,800 lbs. and the free-fall height should be no more than 6 feet.
When a fall occurs, the penetrating spikes on the machine engage and pierce into the roof, creating a safe and secure anchor system. What else? This system can be reused after it has engaged!
Excluding concrete, the Original Penetrator works on almost all surfaces and is designed to be used only on low slope surfaces. The anchorage system has been tested and approved for use on built-up, thermoplastic polyolefin (TPO), ISO, PVC membranes, EPDM, and other standard materials that are part of a finished roof system.
The Original Penetrator cart offers:
- Penetrator Device
- Roofing Zone Cart
- 11 gauge steel tube handle
- 18 in. heavy-duty flat free tires
- A dead-man brake
- An anti turning pin
- 2,000 lbs. Capacity
An optional material box accessory is available and holds debris, decking materials, and other standard roofing materials when not in use.
features
Meets OSHA Fall Protection Regulation 1926.502
- Fall protection for 3 fall arrest and 2 fall restraint or a total of 5 workers
- Lightweight and portable design
- Simple 2 pin installation
- Telescoping arm extends and supports ballast
- Penetrates through: Built-Up, TPO, ISO, PVC, and EPDM
- Does NOT go through concrete
Specifications
Made in the U.S.A.
- Weight: 515 lbs.
- Width: 30 in.
- Length: 72 in.
- Weight: 515 lbs.
- Yellow Powder Coat Finish
