Dock Hardware & Accessories

Tie Down Products

Dock Hardware & Accessories

  • Angles
  • Backing Plates / Hurricane Straps
  • Chain Retainers
  • Deck Plates
  • Dock Connectors
  • Dock Ladders
  • Inside Corners
  • Mounting Hardware
  • Outside Corners & Outside Corner Connectors
  • Piling Holders
  • Piling Rods
  • Ramp Rollers
  • Pipe Holders
Angles

This heavy-duty angle is used for cross supports.  Contains 2 – .688″ diameter round holes.

  • 2-3/4″ Leg Length
  • 2-1/2″ Height
  • Hot Dip Galvanized

Part #: 26392

Resources:
3/16″ WASHER PLATE

Washer plate measures 5″ x 1-1/2″ and is made of 3/16″ galvanized steel.

  • 5″ Length
  • 1-1/2″ Height
  • Hot Dip Galvanized

Part #: 24284

Resources:
Chain Retainers

Chain Retainer made of galvanized 3/19″ steel .  Used to hold dock in place. (Accommodates 1/4″, 3/8″, & 1/2″, chains.)

  • 5″ Length
  • 5″ Height
  • Hot Dip Galvanized

Part #: 26529

Resources:
22″ HD DECK PLATE

This 3/16″ thick 22-1/2″ x 4″ x 6″ angle can be bolted from the top and side of the dock. The hoop can then be bolted to the angle, allowing it to be removed seasonally. For use with piling hoops (part numbers 26391, 26393, 26394 and 26429).  Holes in the top of plate allow top mounting of roller assembly (part number 26414).

  • 22-1/2″ Length
  • 4″ Wide Top Plate and 6″ Wide Side Plate
  • Hot Dip Galvanized

Part #: 26416

Resources:
3/16″ FEMALE T CONNECTOR

Two 1/2″ welded tabs with 1-1/4″ gap on a 5″ x 5″ plate.  Used with male connectors to attach dock sections and ramps.

  • 5″ Plate Length
  • 5″ Plate Width
  • .813″ Diameter Hole in Tabs, 1.313″ OC From Mounting Plate
  • Hot Dip Galvanized

Part #: 26528

Make Quick work of anchor installation with the 1/2 HP, 18 RPM Electric Drive Machine from Tie Down Engineering. Comes with Ground Fault interrupter cord. Kit includes adapter head for double head ground anchors (Manufactured Home anchors).

Resources:
3 STEP LADDER – BLUE POWDER COAT FINISH

3-Step Steel ladder with a Blue Powder Coat finish provides a tough durable finish for extra protection.  250 pound capacity

  • 47-1/2″ Overall Height
  • 14″ Step Width
  • Powder Coat Finish
  • Stainless Steel Mounting Hardware

Part #: 27273

Resources:
3/16″ INSIDE CORNER END

Inside corner to reinforce dock and finger pier corners.  Oblong holes sized for 1/2″ carriage bolts.

  • 8-1/4″ Length
  • 5″ Height
  • Oblong .438″ x 2″ Holes on 3.5″ Centers
  • Hot Dip Galvanized

Part #: 26524

Resources:

Custom Manufacturing

We can make any custom product you need

State of the art CNC and robotic welding equipment ensure that our ability to create and innovate is never limited by a lack of manufacturing technology.

Learn how we do it
Wholesale Sales Contacts
Knute Chauncey

Manufactured Housing Sales Manager
404.344.0000 Ext. 1528
knute@tiedown.com