Cable & Hardware

We coat cable, yours or ours!
Custom PVC extrusion available for aircraft cable sizes 1/16 in to 3/8 in. If you require PVC coated cable in clear or colors, contact us for a quote.

Custom Cable Assembly
From 1/16 to 1/2 in., Tie Down Engineering can fabricate cable assemblies for most applications. Utilizing in house hydraulic and rotary swaging presses as well as automated cutters, Tie Down Engineering offers a wide array of cable assemblies utilizing formed loops, stops, and threaded terminals.

FAQs
Can I purchase cable or anchors directly from Tie Down Engineering?

No, please contact us via phone or email and we can locate a distributor of these products nearest you.

How do I install an eye anchor?

Using a straight rod to turn (screw) anchor into the ground.

How do I fasten or tie off aircraft cable?

Cable does not allow you to form a knot like rope. Loops are required for connecting or terminating a cable end. Use either a cable rope clip or cable sleeve to form a loop.

What diameter cable should I get?

Cable or wire rope should be strong enough for the maximum potential load. In our downloads library, each diameter cable has a safe working load rating which is 1/5th the breaking strength. This is one of many criteria needed to make a cable diameter decision. Note that cable or wire rope is not to be used for aircraft, overhead lifting or supporting human life.

Customer Service Contact

Ben Aron 1-800-241-1806 x 1525
benaron@tiedown.com

Specialty Tools & Fasteners Distributors Association
Social media & sharing icons powered by UltimatelySocial