Home
Dock Hardware
 |
 |
Connector Pin SetFor quick disconnect. Used to connect male and female T connectors. Galvanized 3/4" connector pin and hitch clip pin. P/N 26531 - Standard Grade |
|
 |
 |
Heavy Duty Deck PlateFor use with Piling Hoop. This 3/16" thick 4"x 6" angle can be bolted from the top and side of the dock. The hoop can then be bolted to the angle, allowing it to be removed seasonally. 22" long. P/N 26416 - Commercial Grade |
|
 |
 |
Back-Up Plates5"x 5" reinforcing plates are used to back up the Single T Males and Females. P/N 26413 - Commercial Grade |
|
 |
 |
Heavy Duty Piling HoopFor pilings up to 12" in diameter. The hoop is constructed of 1 1/2" pipe and is hot dip galvanized. It can be bolted directly to the side of the dock or to the optional Deck Plate (Model 26416) P/N 26412 - Commercial Grade |
|
 |
 |
Piling Hoop & Roller AssemblyIntended for areas with lots of wind, current, or tidal action. Combines the Piling Hoop (Model 26412) and Roller Assembly (Model 26414) to make up and down movement easier. For pilings up to 12" in diameter. P/N 26415 - Commercial Grade (3/8" x 3") |
|
 |
 |
Heavy Duty Roller AssemblyBracket and roller bolt directly to the Deck Plate (Model 26416) and can be added to aid up-and-down motion of the dock in areas with tidal action. 6" roller turns on a 5/8" diameter shaft. 3/8" bracket is hot-dipped galvanized. P/N 26414 - Commercial Grade |
|