Home
Dock Hardware
 |
 |
Male T ConnectorHas one welded 1/2" tab. Use with female T connector to attach fingers and ramps. 5"L x 5"H. 3/4" bolt set (N) required for joint. P/N 26532 - Standard Grade |
|
 |
 |
Washer PlateUse two washer plates with each angle. Measures 1-1/2"L x 5"H. P/N 24284 - Standard Grade |
|
 |
 |
Chain RetainerBolts to side of dock. Use weights and chains to hold dock in place. Accommodates 1/4", 3/8", & 1/2" chain. Measures 5"L x 5"H. P/N 26529 - Standard Grade |
|
 |
 |
Pipe Holder/ Outside 3"Bolts to outside of dock. Carriage bolt set (M) required for attaching. Use 2" pipe to hold dock in place. P/N 24280 - Standard Grade |
|
 |
 |
Lag Bolt SetBolt and flat washer hot dip galvanized used to attach flotation drums to dock system. P/N 24288 3/8" x 2"- Standard &
Commercial |
|
 |
 |
Carriage Bolt SetUsed to attach A through K component parts. 3/8" x 2-1/2" bolt, flat washer and nut. Hot dip galvanized. P/N 26530 - Standard Grade |
|
 |
 |
3/4" Hex Head Bolt SetIncludes lock nut. Used to connect male and female T connectors. Galvanized. 3/4" x 3-1/2". P/N 24278 - Standard Grade |
|